Answer 2

We all get the same thing - different colors depending on the temperature, length of time in process, quality of the distilled water, Spacing of electrodes, and voltage used. There may be other factors also. You can use an electrode until it disappears or dissolves and falls off. This is providing you have pure silver and not something that is silver plated. I believe the cloudiness in your case is just more silver, or longer processing. Just let it sit overnight and pore off the top after a few days if you are worried. If you try to use normal tap water then you will get some really cloudy mix that you will not want to drink. Otherwise if there is no chlorine in solution and you are using the best distilled water you can find, this would be the lowest resistance using an ohm meter, then you are probably fine and have normal silver solution like the rest of us. I have let it run at times until it gets greyish black, filtered it, and let it set and used it. Different temperatures give different results. This could be the major factor in your case. You don’t need to keep the process warm; once the process starts, you don't need the heat. You may want to get a laser pointer to see how many particles you are putting into solution. The more the beam is stopped the more PPM in the solution.

Mike